Sale : 50% off : DNM Phono Plugs!

The DNM Phono Plug is selected for its low metal content, to minimise eddy current formation and ensure a good audio performance.

The pair is supplied as one red and one black. The internal connections are soldered.

For the number of plugs needed for different DNM cables, see here.

To order more than 10 pairs, use the contact us button above to email DNM for pricing.

Phono Sockets (PAIR)

The pair is supplied as one red and one black. The internal connections are soldered.

To order more than 10 pairs, use the contact us button above to email DNM for pricing.

3.5mm Plug (stereo)

The internal connections are soldered.

To order more than 10 plugs, use the contact us button above to email DNM for pricing.

These high quality DIN plugs have minimum metal content for best sound. As they have locking collars which may not suit ordinary DIN sockets, these plugs are intended solely for use with DNM amplifiers.

For the number of plugs needed for different DNM cables, see here.

For more than 10 plugs, use the contact us button above to email DNM for pricing.

NB : TWO of this item must be ordered at each end of the cable for stereo use.

For the number of plugs needed for different DNM cables, see here.

We recommend using a complete four-conductor ribbon for each channel, connecting the two inner conductors (blue and white) in parallel for the equipment ground connection.

For more than 10 of this item, use the contact us button above to email DNM for pricing.

NB : TWO of this item must be ordered at each end of the cable for stereo use.

For the number of plugs needed for different DNM cables, see here.

We recommend using a complete four-conductor ribbon for each channel, connecting the two inner conductors (blue and white) in parallel for the equipment ground connection.

For more than 10 of this item, use the contact us button above to email DNM for pricing.

These high quality tonearm DIN plugs are offered for use with Shielded tonearm cables connecting to the phono stage or amplifier.

One plug is needed per tonearm since it is only needed at the tonearm end of the cable.

4mm banana plugs using the new "leaf" design. Solder connections. A pair of plugs, with one red and one black plug.

These new "leaf" 4mm plugs can be stacked for bi-wiring from amplifiers with only one set of 4mm sockets.

For the number of plugs needed for different DNM cables, see here.

Soldering Instructions for these plugs and DNM cables : please see pages 10 to 12 in this PDF document.

For more than 10 pairs, use the contact us button above to email DNM for pricing.

The 2mm sprung body banana plugs mate with the sockets used on DNM PA3/PA3S amplifiers. They have solder connections. A pair of plugs, with one red and one black plug.

For the number of plugs needed for different DNM cables, see here.

For more than 10 pairs, use the contact us button above to email DNM for pricing.

Spade terminals with solder connections (one red and one black). Please order quantity TWO for normal stereo use at one end of your speaker cables.

ZRTNs are always supplied with a pair of 4mm sockets at each end of the ZRTN.

If you use 2mm plugs with springy bodies to connect to your DNM PA3 or PA3S power amplifier, you will need to buy two sets (enter quantity TWO above) of these adaptors for stereo use to connect your springy-bodied 2mm plugs into thrr two ZRTNs.
Alternatively, if you are happy to solder your cables, you could order 4 off 4mm LEAF plugs and solder these onto your speaker cables instead of the 2mm plugs - but that is a little more expensive.

Please note : these adaptors will NOT give a reliable contact if used with solid-bodied 2mm plugs, please see the adaptor below for use with 2mm solid-bodied 2mm plugs.

If the ZRTNs will need to plug into 2mm sockets in your amplifier, we strongly recommend ordering your ZRTNs with the optional short cables soldered to your ZRTNs and ending in 2mm plugs, this will cover your amplifier connections.

ZRTNs are always supplied with a pair of 4mm sockets at each end of the ZRTN.

If you use 2mm plugs with solid metal bodies to connect to your DNM PA3 or PA3S power amplifier, you will need to buy a stereo set (enter quantity TWO above) of these adaptors to connect your solid-bodied 2mm plugs into the ZRTNs.
Alternatively, if you are happy to solder your cables, you could order 4 off 4mm LEAF plugs and solder these onto your speaker cables instead of the 2mm plugs - that is less expensive.

These more expensive adaptors are NOT needed (or recommended) if you use springy-bodied 2mm plugs, please see the adaptors above for springy-bodied 2mm plugs.

This version uses internal springs to grip plain SOLID-bodied 2mm plugs securely and so this more complex construction makes it more expensive. If you look inside the adaptor in the photo above, you can just see the internal springs needed to suit the solid-bodied 2mm plugs. (The comparable photo of the version for sprung plugs shows the plain internal construction.)

If the ZRTNs will need to plug into 2mm sockets in your amplifier, we strongly recommend ordering your ZRTNs with the optional short cables soldered to your ZRTNs and ending in 2mm plugs, this will cover your amplifier connections.