DNM-built cables - Ready to Use

SALE - 50% OFF build cost

This product is a fully-built DNM Stereo Resolution 2 speaker cable terminated with 8 x 4mm stackable banana plugs ready to be plugged in for use - other plugs can be chosen for either end of the cable.

Remember that DNM Resolution 2 is a stereo ribbon cable that contains 4 conductors in the ribbon which is designed to be easily separated at the speaker end of the cable. The length ordered will feed two speakers for single wire stereo or one speaker for bi-wiring.
Full details of Resolution 2 announcement here..

Please make sure to choose your cable length from the top drop-down list above, because the default length is only 1 metre.
The drop-down list displays the extra cost for the extra length you require.

You can then choose to change the plugs at either end of the cable using the two other drop-down lists above if you do not want 4mm plugs there. These plug costs will always be added to the base price.

The other plug options are 2mm banana plugs, spade terminations, or just stripping the 4 cable conductors at that end of the cable.

SALE - 30% OFF cable pricet

This product is a fully-built DNM Stereo Precision 2 speaker cable terminated with 8 x 4mm stackable banana plugs ready to be plugged in for use - other plugs can be chosen for either end of the cable.

Remember that DNM Precision 2 is a stereo ribbon cable that contains 4 conductors in the ribbon which is designed to be easily separated at the speaker end of the cable. The length ordered will feed two speakers for single wire stereo or one speaker for bi-wiring.

Please make sure to choose your cable length from the top drop-down list above, because the default length is only 1 metre.
The drop-down list displays the extra cost for the extra length you require.

You can then choose to change the plugs at either end of the cable using the two other drop-down lists above if you do not want 4mm plugs there. These plug costs will always be added to the base price.

The other plug options are 2mm banana plugs, spade terminations, or just stripping the 4 cable conductors at that end of the cable.

SALE - 30% OFF ALL RAW CABLE COSTS

This product is a fully-built DNM Stereo Interconnect v3 cable terminated with 4 x DNM Phono plugs (by default) ready to be plugged in for use - other plugs can be chosen for either end of the cable.


Seven reasons why you should buy ready-made DNM cables direct from DNM
Design :

1. DNM invented these cables, so we know the best way to build them.
2. We use non-mechanical cable preparation to protect the soft copper solid core conductors.
3. DNM can customise the cable for your system and offer system advice.
4. DNM offer the ideal connecting plugs.
5. Cable strain relief is built into DNM-built interconnect cables.
6. Balanced XLR cables need a special cable build, developed by DNM.
7. Only DNM can build HFTN interconnect cables.

Please make sure to choose your cable length from the top drop-down list above, because the default length is only 0.5 metre.
The drop-down list displays the extra cost for the extra length you require.

You can then choose to change the plugs at either end of the cable using the two other drop-down lists above if you do not want DNM phono plugs there. These plug costs.will always be added to the base price.

The other plug options are DNM 5-pin locking DIN plugs for DNM Amplifiers,
XLR sockets (where the equipment has 3 pins showing inside the XLR)
and XLR plugs (where the equipment has 3 little sockets showing inside the XLR).

Please note that BALANCED interconnect cables using XLR plugs need DOUBLE the normal length of cabling.
A separate Ready to Use Cable product has been added to the DNM Shop below to cover BALANCED cables using XLR connections.

SALE - 30% OFF ALL RAW CABLE COSTS

This product is a fully-built DNM Stereo Interconnect v3 cable with four In-Plug High Frequency Termination Networks, terminated with 4 x DNM Phono plugs (by default) ready to be plugged in for use - other plugs can be chosen for either end of the cable.


Please make sure to choose your cable length from the top drop-down list above, because the default length is only 0.5 metre.
The drop-down list displays the extra cost for the extra length you require.

You can then choose to change the plugs at either end of the cable using the two other drop-down lists above if you do not want DNM phono plugs there. These plug costs will always be added to the base price.

The other plug options are DNM 5-pin locking DIN plugs for DNM Amplifiers, XLR sockets (where the equipment has 3 pins showing inside the XLR), XLR plugs (where the equipment has 3 little sockets showing inside the XLR) and Eichmann Bullet phono plugs.

This product is a fully-built BALANCED DNM Stereo Interconnect v3 cable but with two XLR sockets (female) at the source end and two XLR plugs (male) at the destination end, all fitted by DNM.

Please make sure to choose your cable length in metres from the drop-down list too, because the default length is only 0.5 metres.

The drop-down list shows the extra cost for any extra length you want.

The female XLR socket is shown on the RIGHT in the photo, the male XLR plug is on the left.

Please note that BALANCED interconnect cables using XLR plugs use the whole DNM ribbon for each channel so they need DOUBLE the normal length of cabling and two XLR plugs at each end.
This requirement is automatically included in balanced cable orders.